Choosing Upvc Window Replacement Hinges
The process of selecting and fitting upvc window replacement hinges isn't as difficult as you may think. Make sure the hinges' arrows face the right way and measure the thickness of the hinge arms on the frame that opens (13mm or17mm).
There are several types of hinges to choose from, each with unique characteristics. This article will review the most common types of uPVC window hinges, and their benefits.
Egress/Easy Clean Hinge
They are a great option for replacing or upgrading your fire escape safety window since they open up to a full 90-degree angle. They can also be disengaged into an 'easy clean' position to allow you to easily access the exterior of windows to clean them without climbing on a ladder or lean over at potentially hazardous angles.
Yale is among the most trusted and well-known brands in the world of home security. These hinges can be used with any kind of uPVC side hung window. They can be moved into the easy-clean position by pressing a small button and then sliding the window sash over to one side. When the sash is closed, it will automatically return to its original position.
Both 13mm and 17mm are both available. Utilize our Egress Selection Guide to help you select the best product for your window.
These hinges can be used with conventional side-hung frames made of aluminium or uPVC. The friction screw is used to adjust the resistance. This makes opening the window more simple and reduces the chance of a mistaken closing in severe winds. They have been tested for over thirty thousand cycles, and they are compliant with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.
The Nico Egress Easy Clean friction hinge is easy to use and does not have buttons or catch. It provides a convenient and secure solution for emergency exits and cleaning. The hinge retention clip is located on the inside of the bottom corner. This will release the top and bottom catches, allowing you to slide the sash into the easy-clean position. Once it is in the easy-clean position close the window to return the hinges to their original position.
Fire-Escape Hinge
Fire Escape Hinges (also called "Easy Clean") are used to replace windows that open sideways to ensure fire safety. These kinds of hinges for windows open wider and faster than standard hinges to allow an open space to escape in the case of a fire. Building regulations require that this type of hinge should be placed in any habitable space with a window.
They have an exclusive friction stay that opens the window to a 90 degree angle and allows the opening sash to slide across when it is open for easy cleaning of the exterior side of the glass without having to use ladders. The hinges have no fiddly buttons or catches and are operated with an easy, secure lever that is accessible from inside the home.
The hinges are made in the UK by Cotswold and come with a child safety limiter for day to day use that can be overridden by a hidden button, providing you with peace of mind that your children will not accidentally open the window too far. The stack heights are 13mm or 17mm.
Find the length of the side-hung window hinge, which is fixed to the frame. (See the article on measuring upvc window hinges). Then select the correct size hinge from the selections below.
It is important to note that the measurement is taken from the component that attaches to the frame and not the sash. The actual hinge length may be shorter or larger based on the manufacture of your old windows. Also, when selecting the width of your hinge the majority of upvc windows can be fitted with a 13mm stack height. However, should your old window frame have 17mm then choose the option to use this. You can also install the 4mm packer to make up the difference. All hinges are supplied handed (1 left and 1 right). The hinges do not come with screws. If required, these can be purchased separately. Our upvc window repair screws are highly recommended. They are specially designed to enhance the performance of your hinges that allow them to run smoothly for a longer time. They have a lower friction design, and an improved weather seal with a new nylon reducer cap.
Restricted Hinge
There are occasions when windows must open fully and this can be a problem with the standard hinge. These child safety friction hinges are a great solution to this problem. They can be used in situations where ventilation is needed but escaping or cleaning an fire isn't possible. They function by limiting the amount of sash that can open and allowing the override of this restriction with a button. They can be used for top and side hung windows. They are available in 13mm and 17mm stack heights.
The Nico Restricted Egress Friction Hinge blends the features of a standard restrictor as well as an escape hinge to provide an effective and simple way to meet building regulations. It is available in 13mm and 17mm stack heights and is suitable for both side and top opening uPVC window. It is available as a pair where one hinge is restricted egress, the other unrestricted, allowing one hinge to be fitted to the bottom of the sash while the other is fitted to the top.
These uPVC hinges are made to be used with windows that cannot be fully opened, like a child's bedroom. The mechanism limits the amount the sash can open to the safety level of 100mm and then re-engages when the window is closed.
These uPVC friction-type hinges can be used on all kinds of windows. They are particularly useful for windows that are difficult to reach, like those in three-storey apartments or those that require ladders. They can be improved with our range security enhancements, such as hinge guard protection plate or dog bolts, in order to achieve PAS 24 performance.
It is crucial to take measurements of the hinges on your window to ensure that you get replacements that are the same size. The easiest way to do this is to look at the hinge in the gallery and working out the location you would like it to be placed. The hinges that hang from the top can only be put on one side, while the side hung ones can only be placed on one side.
Standard Hinge
A standard hinge uses metal-to-metal contact, and there are no additional parts to decrease friction. It's available in a range of finishes and is also fire-rated. To quickly determine aluminium window hinge replacement of hinges, lay it out flat and align a quarter and dime in two corners. If the dime is more snug than the quarter, the corner is rounded by 1/4 inch. If the quarter fits better, it's rounded by 5/8 inch.
Selecting the right hinge can make or break your door's appearance. It's essential to match the finish and style of your door with the hinges to create a seamless design that is both practical and visually appealing.